Two in three business jets come out Harsher than their type on at least one chapter of an operating history report. Our data shows that of the 11,540 jets we could grade on all four TailCheck chapters over the last two years, 7,738 were Harsher on one or more of them. A Harsher grade is ordinary. What matters is which chapter it lands on, what drove it, and whether the records explain it.
Each section of a TailCheck report answers one question about how the aircraft was used, and the public sample report, a Gulfstream G650, shows them all. The grades come from where the aircraft sits within its type, and the logbooks take over where the track stops.
What is in a private jet operating history report?
An operating history report is built from an aircraft's flight track. Ours has nine parts, in this order:
- The header: the airframe, the window, the flight count, tracking gaps, coverage and the peer group.
- The verdict: one sentence and a grade for each of the four chapters.
- Gentler and Harsher lists: every measure that sits outside the middle of the type, with its percentile.
- Four chapters: Fatigue, Corrosion, Engines and brakes, and Utilization, each with its figures and the data behind them.
- Stays on the ground: the longest stay away from base, and any long stretch the track can't place.
- How it travels: route shape as shares, with no airports or dates named.
- Operational summary: every graded row on one page.
- Appendix A1, rhythm: flights by day of the week and by month.
- Appendix A2, method: how the grades work, and a list of what the report can't establish.
The report can be exported as a PDF or a CSV, or sent as a read-only link that expires after 7, 30 or 90 days.
Why review an aircraft's operating history before buying it?
The logbooks say what was done to an aircraft. The flight history says how it was used. Under 14 CFR 91.417(b)(2), records such as total time in service, life-limited part status and airworthiness directive status are transferred with the aircraft when it's sold. They don't have to say where the aircraft flew, how often it landed or where it spent its nights.
That use decides which limits it has been spending fastest. A jet flying short legs builds landings quickly. One parked by the sea spends its nights in salt air. A report read before the pre-purchase inspection tells a buyer which records to ask for first and where the inspector should spend extra time. Our guide on checking logbooks against the flight history covers the matching step by step.
Start with the header
The header says how much of the aircraft's life the report can see. Read it before any grade.
- Window and flights. The sample covers 1 January 2025 to 18 November 2026, with 532 flights in 23 active months. Every count is a minimum, because tracking misses some flights.
- Tracking gaps. These are stretches where the aircraft landed at one airport and was next seen leaving another, so at least one flight went unseen. The report states them as a share of flights: the sample had two, and 1 flight in 267 was missed.
- Coverage. A grade from that share. High means 1 flight in 10 or fewer went untracked, Medium up to 1 in 4, Low up to half, and Limited more than half. The sample reads High.
- Peer set. The group every grade is measured against, with its size. For the sample it is all 535 tracked G650s.
A Low or Limited coverage grade doesn't make the aircraft suspect. It means the utilization figures are floors, and the missing flights would make the aircraft look quieter than it was.
How do Harsher, Typical and Gentler work?
Each graded measure is placed among the aircraft's peers as a percentile. Between the 25th and 75th percentile, the middle half of the type, it reads Typical. Outside that band it reads Harsher when the difference adds wear, and Gentler when it eases it. The comparison figure on every row is the "middle" aircraft of the type, its median.
Each chapter takes the grade of one lead measure, fixed in advance:
| Chapter | Lead measure | Harsher means |
|---|---|---|
| Fatigue | Estimated hours per landing | Fewer hours per landing, so more landings for the hours flown |
| Corrosion | Nights within 2 km of the coast | More nights on the shoreline |
| Engines and brakes | Departures where the longest runway was under 1.25 times the takeoff distance | More short-runway departures |
| Utilization | Flights a month, in the months it flew | More flights |
Because the band is the middle half, about half of any type reads Typical on a chapter, and about a quarter falls on each side. Our data shows exactly that on Fatigue and Utilization: 25 in 100 jets Harsher, 50 Typical, 25 Gentler. Engines and brakes ran slightly under, at about 24 in 100 Harsher, because many jets share the same value, often zero, and a tie with the median stays Typical.
Gulfstream G650, flights a month in the months it flew
5×90th vs 10th
For a G650, Typical utilization runs from about 4 to 9 flights a month. The sample flew about 21, the 97th percentile, so its Utilization chapter reads Harsher.
A quarter on each side for every chapter adds up. Across four chapters, a jet with no Harsher grade at all is the minority.
How many chapters a jet was graded Harsher on
- No Harsher chapter32.9%
- One37.1%
- Two23.6%
- Three5.9%
- All four0.5%
One Harsher chapter was the most common result, at 37 in 100 jets. Three or more was rare, about 6 in 100.
An all-Typical report is rarer than a Harsher one. It describes an aircraft used much like the rest of its type. A report with one Harsher grade and a clear reason in the records can tell a buyer just as much.
Read the rows behind each chapter grade
A chapter grade comes from its lead measure alone. The rows under it can point the other way, and the report shows them all.
Fatigue asks what each landing and pressurization cycle costs the structure. The sample flew 2.3 hours per landing against 2.7 for the middle G650, the 32nd percentile, so it reads Typical. Its short hops, legs under 300 nautical miles, were 18% of flights against 30%, which reads Gentler. Leg length is shown as context without a grade, because shorter legs are what lower the hours per landing. Grading both would count the same thing twice. Landings count against structural and landing-gear life limits, so this chapter tells a buyer how fast those limits have been used.
Corrosion looks at the air around the aircraft overnight. The lead row is the share of nights spent within 2 km of the coast. Below it sit nights within 10 km, damp hours (80% humidity or more, above freezing), freeze–thaw nights and moisture in the air. The sample's 5% of shoreline nights against 6% for the middle G650 reads Typical, and its damp hours read Gentler. The chapter says how many of the nights it could place: 618 of 706 for the sample. Our post on which private jets live by the sea covers how this exposure varies by type.
Engines and brakes measures what departures asked of them. Short runways lead, then hot or high takeoffs (5,000 feet density altitude or more), typical density altitude at takeoff, and nights in a dry climate. The sample's chapter shows why the rows matter. It reads Gentler, because only 6% of its departures were from short runways against 26% for the middle G650. Yet its hot, high takeoffs and its density altitude both read Harsher.
Utilization says how steadily the aircraft was used. Flights a month lead, then days flown a month and estimated hours a year. Hours bring hours-based inspections due sooner, and the chapter is the quickest way to see whether an aircraft has lived a quiet private life or a busy one. Across the whole fleet, the median jet flew an estimated 184 hours and about 10 flights a month in the 12 months to 1 November 2026, at about 1.5 hours per landing.
447 G650s with enough flights to measure, 1 Nov 2025 – 31 Oct 2026, from the same fleet data as every page. The middle half runs from the 25th to the 75th percentile.
The G650 fleet page keeps its figures live over the latest 12 months, so they can differ a little from the two-year figures the report grades on.
Which peer group should you compare against?
The default group is every tracked aircraft of the same type, in every region. The peer group menu can switch every grade to the same type in the aircraft's own operating region instead. A region group is offered only when it holds at least 30 aircraft, and below 30 no row is graded at all.
The switch can move grades, because a type can be flown differently in one region than across the whole fleet. An aircraft that reads Harsher against all aircraft of its type can read Typical against its own region, or the other way round. A broker comparing two candidates should read both on the same group. The group in use is printed in the header and on the PDF.
What the stays on the ground tell you
The report separates three kinds of time on the ground.
- Stays at the home field. Ordinary parking, shown as context. The sample flew 85% of its flying days from the same field.
- Stays away from base. The longest gets its own panel. The sample sat at one field for 27 days, about 32 times its usual gap between flights. That field has a Gulfstream service center for the type, and the report names the kind of facility only, never the airport or the company.
- Tracking gaps. Stretches the track can't place, counted in the header. The days include any time parked at either end, so they measure how long the aircraft can't be placed. They don't measure time flown outside coverage.
Every one of these carries the same limit: the track shows that an aircraft sat, and the logbook shows why. A scheduled inspection and an unscheduled repair look the same from the outside. In our data, 6 in 10 business jets had at least one stretch of 30 days or more without a tracked flight in the 12 months to 1 November 2026, as our post on how often business jets sit idle shows. One stretch is no warning. One with no logbook entry behind it is a question for the seller.
What does the free tail page show?
Every tracked aircraft has a free page at /aircraft/ followed by its registration, and checking a tail opens it. That page grades one chapter: Utilization, or Fatigue when too few of the aircraft's flights were tracked to grade Utilization. For each of the other three chapters it shows the type's median and whether the aircraft sits inside or outside the middle half. It doesn't show which side, or the aircraft's own value. A named aircraft's activity on free pages runs 7 days behind.
The free page is enough to see whether an aircraft is ordinary on the chapter it grades. The full report shows the other three grades, every row behind them, the stays and the method.
What can't an operating history report replace?
The logbooks and the pre-purchase inspection still decide the purchase, and the report tells a buyer what to ask them. Its method appendix lists what it can't establish. The main items are these:
- Exact hours and landings. The report's hours are estimated from time in the air. The totals that count are in the records 91.417 requires.
- Inspection status. Multiengine turbojets are inspected under a program chosen under 14 CFR 91.409(f), such as a current program recommended by the manufacturer. Only the records show where the aircraft stands in it.
- What work was done, or why it sat. A stay at a service center is a fact. The work orders say what happened there.
- Hangar or ramp. Tracking can't see inside a hangar, so a coastal grade measures exposure, and only an inspection finds corrosion.
- Condition. Mechanical condition, maintenance quality and airworthiness are for the pre-purchase inspection.
Used well, the report sits between the listing and the inspection. It turns "how has this jet been used?" into a short list of specific questions.
Buyer checklist
- Read the header first. Note the window, the flight count, the tracking-gap share and the coverage grade before you look at any chapter.
- Check the peer group. Make sure it's the group you meant, and use the same group for every candidate you compare.
- Find the lead measure behind each chapter grade. Then read the rows under it, especially any that point the other way.
- Treat one Harsher chapter as normal. Most jets have at least one. Ask what drove it and match it to the records.
- Match every long stay to a logbook entry. An inspection, a repair, storage or a sale should explain each one.
- Ask for the 91.417 records. Total time, life-limited parts, inspection status and airworthiness directives should agree with what the track suggests.
- Brief the inspector. A Harsher Corrosion or Engines and brakes chapter tells the pre-purchase inspector where to spend extra time.
A TailCheck report gives all four chapters for one aircraft against its type. The sample report shows every section described here, and you can check a tail for free to see its one graded chapter first. To set two or more candidates side by side, use Spotlight, which ranks each measure within the set. The buyer's guides, such as the ones for the G650 and the Phenom 300, cover each type's certified figures and how its fleet flew.
How we measured this
- Aircraft: business jets with at least 20 tracked flights, graded against every aircraft of their type in every region. Only types with at least 30 such aircraft are graded. The window is the two years to 20 November 2026.
- Grades: each chapter's lead measure placed as a percentile within the type. Typical is the 25th to 75th percentile inclusive; a value equal to the type median, or on the median's side of the band edge, stays Typical. Harsher and Gentler follow the direction set out in the table above.
- Chapters graded: Fatigue and Utilization, 19,059 jets each; Engines and brakes, 16,257 jets with enough rated departures; Corrosion, 13,544 jets with at least a quarter of their nights placed at a known airport. 11,540 jets were graded on all four.
- Fleet medians (184 hours, about 10 flights a month, 1.5 hours per landing, 6 in 10 jets with a 30-day stretch) come from our published posts, over 19,391 business jets with at least 20 tracked flights in the 12 months to 1 November 2026.
- Sample report figures were read from the public sample, a Gulfstream G650, on 20 November 2026. It updates with new data, so some figures may since have moved.
- Hours are estimated from time in the air. Our methodology explains how flights and tracking gaps are detected.
- Regulations are cited from 14 CFR Part 91 as published in the eCFR.
Sources
- Aircraft Ledger flight data. Methodology
- Aircraft type: Gulfstream G650/G650ER
- Aircraft type: Embraer Phenom 300
- Aircraft type: Cessna Citation Latitude
- Aircraft type: Bombardier Challenger 300/350
First published .